AEM (Vamac®) COATED ARAMID FABRIC

Fiber consisting of a long chain polymer containing amines and aromatic components. Infusible, does not melt, does not burn, does not soften. Besides it shows low emission of toxic gases while combustion. Certain aramid can decompose at 500 ° C, It is thermostable up to 250 ° C.

The AEM, better known by its brand name Vamac® is one of the most employed rubbers for the manufacture of products submited to high temperatures while maintaining good properties against oxygen, ozone and light.

General Properties min - max
Warp breaking strength 350 - 5000 daN/5cm
Weft breaking strength 350 - 2000 daN/5cm
Warp elongation at break 2% - 5%
Weft elongation at break 2% - 5%
Weight per sqm from 450 gr/m2
Thickness Upon request
Peeling strength Upon request
Continuous Temperature -50 C° à 140C°
Point Temperature -50 C° à 150C°

Properties

Heat resistant
Non-skid
UV resistance
Ozone Resistance
General Properties min - max
Warp breaking strenght 350 - 5000 daN/5cm
Weft breaking strenght 350 - 2000 daN/5cm
Warp elongation at break 2% - 5%
Weft elongation at break 2% - 5%
Weight per sqm 100 - 650
General Properties min - max
Hardness ShA 30 - 90 ShA
Hardness IRHD 30 - 90 IRHD
Tensile Strength 8 Mpa - 20 Mpa
Elongation at break 100% - 900%
Operating temperature
Continuous Temperature -50 C° - 140C°
Point Temperature -50 C° - 150C°
Resistance
Solvent resistance
Acid resistance
oxygen ageing
Ozone ageing
light ageing
Cold ageing --
heat ageing --
Available colors :
 
  • High temperature filtration.
  • Clothing fire protection.
  • Bullet proof vest.
  • Thermo industry,
  • electric and electronic.
  • Aerospace industry,
  • Pipes for the automotive industry and oil,
  • seals for car engines.
  • Conveyor belts.
  • Air chambers.

Ask for information