FKM (Viton®) COATED ARAMID FABRIC

Fiber consisting of a long chain polymer containing amines and aromatic components. Infusible, does not melt, does not burn, does not soften. Besides it shows low emission of toxic gases while combustion. Certain aramid can decompose at 500° C, It is thermostable up to 250° C.

FKM (Viton®), is a fluorinated synthetic rubber. It has excellent chemical inertness, excellent resistance to high temperatures, chemicals, lubricants, solvents and aggressive fuels. FKM also detain a good mechanical properties.

General Properties min - max
Warp breaking strength 350 - 5000 daN/5cm
Weft breaking strength 350 - 2000 daN/5cm
Warp elongation at break 2% - 5%
Weft elongation at break 2% - 5%
Weight per sqm from 450 gr/m2
Thickness Upon request
Peeling strength Upon request
Continuous Temperature -15 C° à 250C°
Point Temperature -15 C° à 260C°

Properties

Heat resistant
Acids resistance
Non-skid
UV resistance
Oil storage
Ozone Resistance
General Properties min - max
Warp breaking strenght 350 - 5000 daN/5cm
Weft breaking strenght 350 - 2000 daN/5cm
Warp elongation at break 2% - 5%
Weft elongation at break 2% - 5%
Weight per sqm 100 - 650
General Properties min - max
Hardness ShA 30 - 90 ShA
Hardness IRHD 30 - 90 IRHD
Tensile Strength 8 - 20
Elongation at break 100% - 900%
Operating temperature
Continuous Temperature -15 C° - 250C°
Point Temperature -15 C° - 260C°
Resistance
Solvent resistance
Acid resistance
oxygen ageing
Ozone ageing
light ageing
Cold ageing --
heat ageing --
Available colors :
       
  • High temperature filtration.
  • Clothing fire protection.
  • Bullet proof vest.
  • Thermo industry, electric and electronic.
  • Aerospace industry, Pipes for the automotive industry and oil, seals for car engines.
  • Conveyor belts.
  • Air chambers.

Ask for information