NATURAL RUBBER COATED COTTON TIRE CORD

Tire cord fabric is a type of industrial fabric which is constructed using High Tenacity yarns in the warp direction and yarns of negligible resistance in weft direction which is used to hold warn yarns locked in their position. Tire cord coated fabrics provides fundamental properties such as controlled deformation, high strength, abrasion resistance, etc. Widely used by the tire industry, it is also employed for the rubber hose manufacture, air springs, expansion joints, among many other applications.

Cotton is a natural fiber of vegetal origin. The cotton thread is derived from the transormation of Gossypium bristles (or cotton). Commonly we also referred under the same name the fabric after the weaving of the wire. Cotton is the first textile fiber used in the world despite the advent of synthetic fibers. It is inflamable and starts decomposition at 160 ° C. Cotton is popular thanks to its characteristics: aspect, lightness, comfort and ease of assembly and processing.

Natural rubber is to be considered as the sole non-synthetic rubber. This particular rubber can be recycled for the reutilization, mostly for the manufacturing of tires. New methods of recycling natural rubber are under development to diminish the ecological impact of used tires and other products. Detaining excellent physical properties (elongation at break, tensile strength and abrasion) and presented in a widespread range of hardness, natural rubber has the best elasticity among all rubbers. Under ambient conditions (a mmix of the right temperature, sun exposition, rain and wind) natural rubbers shows almost perfect fatigue resistance, excellent compression and tear strength which makes it ideal for any dynamic applications.

General Properties min - max
Warp breaking strength 75 - 120 daN/5cm
Weft breaking strength -
Warp elongation at break 10% - 20%
Weft elongation at break selon construction
Weight per sqm from 550 gr/m2
Thickness Upon request
Peeling strength Upon request
Continuous Temperature -50C° à 70C°
Point Temperature -50C° à 80C°

Properties

Fireproofed
Abrasion resistance
Non-skid
General Properties min - max
Warp breaking strenght 75 - 120 daN/5cm
Weft breaking strenght 70 - 90 daN/5cm
Warp elongation at break 10% - 20%
Weft elongation at break 10% - 20%
Weight per sqm 200 - 400
General Properties min - max
Hardness ShA 30 - 90 ShA
Hardness IRHD 30 - 90 IRHD
Tensile Strength 8 - 20
Elongation at break 100% - 900%
Operating temperature
Continuous Temperature -50 °C - 70 °C
Point Temperature -50 °C - 80 °C
Resistance
Solvent resistance
Acid resistance
oxygen ageing
Ozone ageing
light ageing
Cold ageing --
heat ageing --
Available colors :
   
Fireproofing option.
  • Expansion joints

Ask for information