Info Covid-19: 100% Operational to feed your rubber sheets and coated fabrics needs

CR (Neoprene®) COATED ARAMID TIRE CORD

Tire cord fabric is a type of industrial fabric which is constructed using High Tenacity yarns in the warp direction and yarns of negligible resistance in weft direction which is used to hold warn yarns locked in their position. Tire cord coated fabrics provides fundamental properties such as controlled deformation, high strength, abrasion resistance, etc. Widely used by the tire industry, it is also employed for the rubber hose manufacture, air springs, expansion joints, among many other applications.

Fiber consisting of a long chain polymer containing amines and aromatic components. Infusible, does not melt, does not burn, does not soften. Besides it shows low emission of toxic gases while combustion. Certain aramid can decompose at 500 ° C, It is thermostable up to 250 ° C.
CR or Chloroprene Rubber, commonly known as Neoprene®, was the best option to manufacture products that are to be in contact with oils and fuels in the past.  Nowadays, Neoprene® is considered to have a moderate resistance to these components. However, Chloroprene Rubber can be considered a mix solution as it has better resistance to a diverse source of degrading agents (like oil, ozone, chemicals and heat) than Natural Rubber. Instead Neoprene® presents lower physical properties. In spite of the physical properties, Neoprene® has a perfect airtightness, therefore it is widely used in the manufacture of inflatable structures of all sort. Its resistance to fire is also excellent, and can be presented in self-extinguishing formulations if required.

colmant-coated-fabrics-nappe-tramee-11-15-08
General Propertiesmin - max
Warp breaking strength350 - 5000 daN/5cm
Weft breaking strength-
Warp elongation at break2% - 5%
Weft elongation at breakselon construction
Weight per sqmfrom 450 gr/m2
ThicknessUpon request
Peeling strengthUpon request
Continuous Temperature-35C° à 95C°
Point Temperature-35C° à 105C°

Properties

Fireproofed Fireproofed
Acids resistance Acids resistance
non-skid Non-skid
UV resistance UV resistance
Water resistance Water resistance
Airtightness Airtightness
Isolation to radiation Isolation to radiation
General Propertiesmin - max
Warp breaking strenght350 - 5000 daN/5cm
Weft breaking strenght350 - 2000 daN/5cm
Warp elongation at break2% - 5%
Weft elongation at break2% - 5%
Weight per sqm100 - 650
General Propertiesmin - max
Hardness ShA30 - 90 ShA
Hardness IRHD30 - 90 IRHD
Tensile Strength8 Mpa - 20 Mpa
Elongation at break100% - 900%
Operating temperature
Continuous Temperature-35 C° - 95C°
Point Temperature-35 C° - 105C°
Resistance
Solvent resistance
Acid resistance
oxygen ageing
Ozone ageing
light ageing
Cold ageing --
heat ageing --
Available colors :
         
Fireproofing option.
  • Oil booms,
  • lifting bags,
  • etc.

Ask for information

  • Max. file size: 8 MB.


 
The company Colmant Coated Fabrics, as Data controller, undertakes to respect the law n ° 78-17 of January 6, 1978 modified relating to data processing, the files and the freedoms with regard to the automated processing of data personal information and Regulation (EU) No 2016/679 of 27 April 2016 from its application on 25 May 2018. The information collected on this form is recorded in a computerized file by Colmant Coated Fabrics to prepare your quotation or answer to a contact request. They are kept the time that our services interest you. In accordance with the Data Protection Act, you can exercise your right of access to your data and have it corrected or cancelled by contacting Colmant Coated Fabrics 44 rue louis Braille 59370 Mons-en-Baroeul or by our personal data management form. The data and / or information on our website are indicative and are not contractual. Colmant Coated Fabrics reserves the right to modify them at any time without prior notice.