EPDM COATED ARAMID TIRE CORD

Tire cord fabric is a type of industrial fabric which is constructed using High Tenacity yarns in the warp direction and yarns of negligible resistance in weft direction which is used to hold warn yarns locked in their position. Tire cord coated fabrics provides fundamental properties such as controlled deformation, high strength, abrasion resistance, etc. Widely used by the tire industry, it is also employed for the rubber hose manufacture, air springs, expansion joints, among many other applications.

Fiber consisting of a long chain polymer containing amines and aromatic components. Infusible, does not melt, does not burn, does not soften. Besides it shows low emission of toxic gases while combustion. Certain aramid can decompose at 500 ° C, It is thermostable up to 250 ° C.
Ethlylene Propylene Diene Monomer is a copolymer of ethylene and propylene and a smaller amount of a diene monomer which forms chemically unsaturated ethylene groups pendant from the main saturated chain. These facilitate cross-linking reactions which do not affect the integrity of the polymer backbone. This feature gives EPDM excellent heat, ozone and chemical resistance. Physical properties are very good and resistance to polar fluids is generally good. Low temperature resistance is very good and EPDM can be compounded to give excellent electrical resistance.

General Propertiesmin - max
Warp breaking strength350 - 5000 daN/5cm
Weft breaking strength-
Warp elongation at break2% - 5%
Weft elongation at breakselon construction
Weight per sqmfrom 450 gr/m2
ThicknessUpon request
Peeling strengthUpon request
Continuous Temperature-55C° à 130C°
Point Temperature-55C° à 140C°

Properties

Heat resistant
Fireproofed
Acids resistance
Non-skid
UV resistance
Water storage
Ozone Resistance
Isolation to radiation
General Propertiesmin - max
Warp breaking strenght350 - 5000 daN/5cm
Weft breaking strenght350 - 2000 daN/5cm
Warp elongation at break2% - 5%
Weft elongation at break2% - 5%
Weight per sqm100 - 650
General Propertiesmin - max
Hardness ShA30 - 90 ShA
Hardness IRHD30 - 90 IRHD
Tensile Strength8 - 20
Elongation at break100% - 900%
Operating temperature
Continuous Temperature-55 C° - 130C°
Point Temperature-55 C° - 140C°
Resistance
Solvent resistance
Acid resistance
oxygen ageing
Ozone ageing --
light ageing
Cold ageing --
heat ageing --
Available colors :
     
Fireproofing option.
  • Expansion joints
  • Ffireproof protection

Ask for information